A hybrid memetic algorithm for maximizing the weighted number of just-in-time jobs on unrelated parallel machines

This paper presents a hybrid memetic algorithm for the problem of scheduling n jobs on m unrelated parallel machines with the objective of maximizing the weighted number of jobs that are completed exactly at their due dates. For each job, due date, weight, and the processing times on different machines are given. It has been shown that when the numbers of machines are a part of input, this problem is NP-hard in the strong sense. At first, the problem is formulated as an integer linear programming model. This model is practical to solve small-size problems. Afterward, a hybrid memetic algorithm is implemented which uses two heuristic algorithms as constructive algorithms, making initial population set. A data oriented mutation operator is implemented so as to facilitate memetic algorithm search process. Performance of all algorithms including heuristics (H1 and H2), hybrid genetic algorithm and hybrid memetic algorithm are evaluated through computational experiments which showed the capabilities of the proposed hybrid algorithm.     

圆形封闭水箱非稳态数值模拟

采用数值方法对圆形封闭水箱内放置两根加热管的二维流动传热进行了非稳态数值模拟,探讨了Ra数从104到107四种情况和封闭水箱的加热管不同摆放位置下的流动和换热;对流场和温度场进行了分析,讨论了不同情况下加热管平均努赛尔数(Nuavg)的变化情况。数值模拟结果表明,随着Ra数增大水箱内的流动表现出了很大变化,决定了传热是导热或者是对流;两个水平加热管在水箱存在最佳的放置距离,这样可以使自然对流情况下的换热达到最好。     

Effect of prolonged heating on the optical properties of vitrinite

Vitrinites ranging from sub-bituminous to anthracitic rank have been heated at 150 and 350 °C for residence times extending up to 32 weeks. Devolatilization vacuoles develop in all the vitrinites at 350 °C, apart from the anthracitic. Occasional small vacuoles formed in the vitrinites of coking rank at 150 °C are most probably related to gas evolution from liptinites. Slight rounding of the margins of vitrinite particles of coking rank at 350 °C indicates softening, while heating at the longest residence time has been sufficient to allow vitrinites of coking rank to undergo ‘active decomposition’. Mosaic structures have developed at temperatures as much as 125 °C below those normally attributed to the formation of such structures in short-term laboratory carbonization experiments on vitrinites of the same rank. Again, apart from the vitrinites of anthracitic rank, the reflectance of vitrinites shows a rise at 150 and 350 °C that would continue beyond the longest residence time used. At 350 °C a large part of the reflectance increase occurs during the first week of heating. The reflectance data and the derived refractive and absorptive indices indicate that with sufficiently long residence times, changes that are more fundamental than ‘molecular stripping’ must take place, probably involving condensation reactions that introduce increased coplanarity into the vitrinite molecules. The implication of these data to thermal metamorphism of coals and to the normal coalification process is briefly discussed.     

Optical properties of carbonized sporinite in vitrinite/sporinite blends

A study is made of the morphological and optical properties of a blend of concentrated sporinite and vitrinite macerals (equal parts) from the same coal carbonized between 400–900 °C at 5 °C/min under nitrogen. Two coals of different rank were used and the results compared with properties of unblended carbonized sporinites. Coke from a blend of low-rank vitrinite and sporinite produced a two-phase optical texture, whereas coke from the medium-rank vitrinite and sporinite mixture produced a three-phase optical texture. A ‘Transitional Zone’ of optical texture was observed at interfaces between carbonized vitrinite and sporinite, this zone being wider for the coal of higher rank. The increase of bireflectance in oil with carbonization temperature of the sporinite in the blends was lower than for the carbonized unblended sporinite, caused by a reduction in fluidity of sporinite with blending. The decrease of refractive index for sporinite carbonized > 600 °C in the blends was lower than that of the unblended sporinite.     

The impact of website content dimension and e-trust on e-marketing effectiveness: The case of Iranian commercial saffron corporations

By considering the problems that commercial saffron companies have faced in international markets, the aim of this study is to investigate the impact of website content, including informational and design dimensions, on the effectiveness of e-marketing and e-trust as mediator variables. These aspects are examined with reference to sales and marketing division managers in a sample of 100 commercial saffron corporations in the Khorasan province. The findings support the ideas that website content has an effect on e-marketing and e-trust and that e-trust plays a mediating role in the relationship between e-trust and e-marketing effectiveness.     

Cyclic scheduling of a robotic flexible cell with load lock and swap

In this paper, we study the problem of robotic cell scheduling with m machines with flexibility, load lock and swap assumptions. The robotic cell repetitively produces parts of identical types. We determine the cycle time of all 1-unit cycles in this type of robotic cell and present two new lower bounds for robot move cycles with load lock and swap, either there is flexibility or inflexibility. We also provide a new robot move cycle and prove that it dominates all classical robot move cycles considered in the existing literature of m-machine robotic cells.     

Effect of mixer geometry and operating conditions on flow mixing of shear thinning fluids with yield stress

Flow mixing of a non‐Newtonian fluid in a stirred tank equipped with a side‐entry impeller was observed using particle image velocimetry (PIV). The effects of some geometrical parameters including the mixer shape and impeller type and position on the flow pattern were studied on velocity fields obtained at different locations inside the mixing domain. The different flow structures revealed that the ratio of inertial and viscous forces largely defines the flow pattern. Dead zones were observed inside the tank due to the rheological properties of the fluid. The size of the dynamic regions and the average velocity near the impeller were enhanced by increasing the suction area. Likewise, large pitch ratios were found to improve the active mixing zone and the axial discharge. Curves for the power and pumping numbers are reported for different axial flow impellers. © 2013 American Institute of Chemical Engineers AIChE J, 60: 1156–1167, 2014     

Investigation of well test behavior in gas condensate reservoir using single-phase pseudo-pressure function

Gas condensate reservoirs present complicated thermodynamic behavior when pressure falls below the dew point pressure, due to fluid dropout and change in the fluid composition. Condensate blockage in the near wellbore region reduces the well deliverability. Mixture composition change in the reservoir makes the interpretation of well tests in gas condensate reservoirs a serious challenge. In this study, at first the capillary number effect and Non-Darcy Flow on compositional simulation of gas condensate reservoirs were investigated and then well test analysis was carried out. The main objective of this work was to examine gas condensate well test analysis using single-phase gas pseudo-pressure and radial composite model assuming capillary number effect and Non-Darcy Flow. For this purpose some fluid samples were selected and results compared. Results indicate that estimation of reservoir properties below the dew point is in good agreement with actual input, particularly for lean fluid samples.     

Resistance of concrete protected by fabric to projectile impact

This paper reports on impact behavior of concrete panels protected by Polypropylene and Zylon fabric, respectively. Concrete panels were cast with different thickness and subjected to impact by a steel projectile. The initial and residual velocities were measured experimentally and the energy absorbed by the different concrete panels with and without fabric was calculated. All concrete panels were able to absorb almost all the kinetic energy of the projectiles. For concrete panels protected by fabric scabbing of concrete from the back face was considerably reduced and the debris contained by the fabric. Upper and lower bounds are proposed for energy absorbed per unit thickness and penetration results are compared with the available empirical formulas. It is shown that current penetration equations do not accurately predict impact parameters for concrete protected by fabric.